4-stroke 38cc 1.6hp Gas Engine Water Pump,Single-Cylinder 1inch Air-Cooled Gasoline Powered Trash Water Pump,Portable High Pressure for Irrigation Pool and Water Transfer,282.5ft³/h

Product Description:WP 10-140F portable four-stroke gasoline enginewater pump pump is suitable for garden lawn watering, field pumping, drainageoperations, clothing crops, green seedlings, irrigation and fertilization, etc.Product parameters:Model: WP 10-140FEngine model: 140F-3Engine type: single-cylinder, air-cooled,four-stroke gasoline engine.Engine displacement: 38ccMaximum power and speed: 1.2kw, 8500r/minFuel tank volume: 650mlEngine oil tank volume: 80mlMaximum suction range: 7mMaximum lift: 30mSuitable water pipe size:Water pump inlet: 1” (25mm)Pump outlet: 1”(25mm)Flow rate: 8000L/hourGross/net weight: 10kg/8.2kgPacking size: 38x35x30cm/14.96*11.81*13.78inProduct size: 36*28*32cm/14.17*11.02*12.60inStart mode: pull startFeatures:1. Equipped with four-stroke 140F-3 new power, supereasy to start2. Low fuel consumption, stable performance, longservice life and low failure rate3. Small size, light weight, convenient transitionand simple operation4. Low noise, low emissions and no pollution5. High speed, parallel conveying>100MUse and maintenance:1. First use: Choose genuine four-stroke gasolineengine oil and add it to the engine oil tank, about 80ml. Replace it every 100working hours in the future.2. Fill the fuel tank and engine oil tank withgasoline and engine oil respectively. Turn on the oil circuit switch,3. Open the water filling cover above the water pump.Fill up the water diversion, use the card link to connect the water inlet pipe(note that all connections of the water inlet pipe cannot leak. Air leakagewill cause the water to be unable to absorb).4. Close the damper and pull the starter. After starting,open the throttle and increase the throttle to start working.(If there are signs of starting but failed to start,please open the damper and continue to pull the starter)5. Good use and maintenance habits. It will makeyour machine work more efficiently.Note: After each work, run at idle speed for 2-3minutes, and turn off the engine after the engine temperature drops to increasethe service life.Troubleshooting itemsThe pump can not pump water: the suction range of the pump is less than 7 metersto ensure that the water connection does not leak, the pump to add water (notself-priming pump), start the engine after the accelerator to wait patiently;Water inlet pipe because the suction of the pump is large, so there must behardness, can not be dented;Pump leakage: excessive pressure leads to leakage of sealant pad, which can besealed by winding raw material beltWater spraying in the pump seal: remove the four screws of the pump case, seethe rubber seal ring inside, reinstall the pump case, tighten the screws.packing list:1x water transfer pumpHose clamps and accessoriesEnglish user manual

• 🛒 【Superior Performance】It adopts a powerful four-stroke engine, which can generate more power. The 1.6hp, 38cc engine has a high speed of 8500r/min, achieving a 282.5ft³/h flow rate. With its help, you can efficiently complete various irrigation and drainage tasks in a shorter amount of time.
• 🛒 【High Capacity Fuel Tank】The built-in fuel tank boasts a capacity of 0.17 gal, sustaining longer usage and fewer refueling intervals, adding to the practicality of this pump,and reducing fuel consumption.The 36*28*32cm/14.17*11.02*12.60 inches compact structure and the top handle make it convenient to take to different workplaces.
• 🛒 【Long-Lasting Durability and Low Noise】Our gas engine trash water pump is built to last with its tough aluminum alloy pump body and cast iron impeller. High-quality aluminum alloy and spray molding process make this product corrosion-resistant, wear-resistant, not easy to deform, and can ensure long-term use.The quality silencer can effectively alleviate the noise generated during the operation process, control the noise within an acceptable range(about 96dB), and provide a comfortable working environment.
• 🛒 【Good Heat Dissipation】The forced air-cooling system and the dense cooling holes in the casing dissipate heat quickly and promptly, which not only prolongs the engine's service life but also ensures that the engine will not stall even after a long period of operation. Its inlet and outlet have been enlarged to a diameter of 1 inches, which allows for a larger flow rate for a wider range of watering and suction.
• 🛒 【Other attributes】Start Method: pull start ,Fuel Type: Gasoline,Package Size: 38x35x30cm/14.96*11.81*13.78inch,Maximum suction range:7mMaximum,lift: 30m,Package Included:1x water transfer pump1*Hose clamps and accessories.